Back to all

Automotive Tips from Tuffy Walled Lake: Tire Replacement Overview

April 18, 2016

Tires are an expensive purchase, so knowing when tires should be replaced is important for Walled Lake drivers. Tires will just wear out with normal use. The depth of the tread on your tire determines how well it will stop, start and steer – especially in wet conditions. 4/32th of an inch (3.2 mm) of tire tread is considered a safe amount of tread.

Uneven tread wear can be a symptom of other problems, and simply replacing your tires will not prevent the same uneven wear from happening to the new tires. At Tuffy Walled Lake in Walled Lake, we can inspect your tires for excessive or uneven wear. Unusual wear may lead to further inspection of steering, suspension or alignment problems. We can help with necessary repairs and with getting you the right tires for your needs.

Give us a call.

Tuffy Walled Lake
784 N. Pontiac Trail
Walled Lake, Michigan 48390
248.624.4440

Need Service?

More articles from Tuffy Tire & Auto Service Center Walled Lake

Differential Essential (Differential Fluid Exchange)

July 20, 2025

What's the dif? To an automotive technician, it's the differential, a part of your vehicle that helps direct power from the engine to the wheels. The differential is a gearbox that enables the drive wheels to turn at different speeds (they do that when you turn). Inside the differential is a f... More

Timing is Everything (Timing Belt)

July 13, 2025

Talk about exquisite choreography; it happens under the hood of your vehicle every time you take a drive. Your engines many complex parts must work exactly together. One key is a part called a timing belt, which enables the synchronizing of two of your engines components, the camshaft, and the ... More

U and your U-Joints (Lubricate U-Joints)

July 6, 2025

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More