Back to all

Automotive Tips from Tuffy Walled Lake: Serpentine Belt System Wear

December 28, 2016

The primary job of the serpentine belt for Walled Lake drivers is to provide important traction to spin the accessories. As the belt wears it loses some of its grip and the accessories may not spin at optimal speeds. For example, if your alternator doesn’t spin fast enough, the battery will not completely recharge while you’re driving and you could end up stranded around Walled Lake with a dead battery.

In short, a worn serpentine belt will stress all of the accessories it powers leading to premature wear and possible early replacement. When as little as 5% of belt material is lost, the serpentine belt cannot provide the proper traction for the accessories. Your friendly and professional Tuffy Walled Lake service advisor can inspect your belt for excessive wear and replace your serpentine belt system if it’s excessively worn.

Give us a call.

Tuffy Walled Lake
784 N. Pontiac Trail
Walled Lake, Michigan 48390
248.624.4440

Need Service?

Request a Quote

More articles from Tuffy Tire & Auto Service Center Walled Lake

Taking the Heat (Heater Hose Maintenance/Repair)

March 17, 2024

If you have an internal combustion vehicle, you know it has a lot of hoses that carry various fluids. And if you have a heater in your vehicle, you'll have heater hoses. A heater hose connects to and from the engine so some coolant can be circulated through a little radiator called a heater core... More

Gas Smell! (What Causes Gasoline Odors)

March 10, 2024

If you've ever walked into your garage and noticed it smelled like gasoline, pay attention. Gasoline can be dangerous, both from the health problems fumes can cause and the fire danger gasoline presents. There are many things that can cause a vehicle to give off a gasoline odor. One of the easi... More

A "Mounting" Problem (Motor Mounts)

March 3, 2024

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be. Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin. Pretty tall order, wouldn't you say? ... More